The 10 Most Terrifying Things About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't get rusty or decay.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good repair.

For single pane windows it is relatively easy to replace windows, and the new one will usually fit inside the old frame very easily. If you have double-paned windows which are joined by internal beading, it will be more difficult to remove and replace the old panes. In this case you'll need locate some plastic spacers to help the new pane to fit properly into the frame of the window.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass yourself. It is also a good idea to lay down a drop cloth prior to when you start working on the glass, so that any shards fall onto the cloth instead of landing on the floor, where they could be trampled upon and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to block water and drafts from getting into the home until a professional can come out and repair the window. It also acts as an obstruction to prevent intruders from getting into your home. If the gap is large, you might want to consider using the security door with an integrated window as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, over time, they are susceptible to a range of issues, including sagging. A sagging window in uPVC can cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from getting worse.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll have to open the window to access the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after having repositioned your hinges. If you're satisfied with the fit of the window, tighten the screws to secure them in the right position.

If you aren't able to move the hinges you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to loosen. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows are watertight and draught-proof.

UPVC handles can also loosen. This is typically caused by screws that have become undone over time, but it can also be due to the mechanism of the handle wearing out. It's relatively simple to fix a loose uPVC hand. First, you'll need to close your window repairs and do a test to ensure that it fits. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle, and then return the mechanism to its original its original position.

3. Water Leaks

It is important to take action if you get up each morning to discover mouldy walls and floors that are wet. The leaks of water from windows do can not only cause degradation of your home's structure but also undermine your efforts to control the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or is missing.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on how severe the issue is, the old caulking may need to be removed. When it is time to upvc window repair near me repair, it is important to be careful not to over-caulk. This will only make your window harder to clean and lower its energy efficiency.

Make sure that the drainage holes are free of debris in them, and also that the sill pan is properly angled to allow the water to drain from the window. In more severe situations, you may have to replace the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under humid conditions and can propagate quickly throughout the home.

It is also important to note that if the leakage originates from the glass of your double-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. A upvc window repairs near me specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it opens with the breeze. They can be easily repaired by any DIYer who is skilled and are usually completed in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that are hinged and, like all mechanical parts, they can wear down over time. It's easy to change the hinges on a window, but it's simpler if you have someone to help you to hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The problem can be caused either due to opening the window in the wrong way or a faulty installation in the factory. Sending us photos via our website is often enough to solve the issue. We are more than happy to provide suggestions.

It is also crucial to grease the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It can also lower the risk of a window repairs sticking and prevent corrosion. This should be done at least every year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. The hinges can also be disaligned as a result of wear, which can cause a gap where the sash and frame meet. If they are damaged beyond repair, it could be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge side of the window, can also be misaligned, and again it is possible to just give them a clean but in some cases it might be necessary to get them replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Another option is to replace the window repair with low-emissivity glass, this will help in regulating indoor temperatures and will reduce the possibility of draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window sill. These will keep your home warm by blocking cold air.

The windows made of upvc can continue to provide excellent insulation and security to your home with regular maintenance and repairs. However, it is important to recognise that all windows have a lifespan and there may come the point when it's more efficient to replace them than repair them. If you encounter any issues with your Upvc window it is recommended to speak with a professional as soon as you can.