The 12 Worst Types Of Users You Follow On Twitter

How to Deal With a Lost Motorbike Key

It can be very frustrating and stressful to lose your key for your motorbike. You could end up stranded or more likely, your bike may be stolen.

The first thing you need to do is to calmly and carefully look for your keys. This will give you the best chance of finding them.

1. Get the Cylinder Code

A lost motorcycle key is a huge hassle, especially if you have to visit the dealership to get a replacement. If you know what you need to do, it is possible to get the problem resolved quickly and inexpensively.

The first step is to determine the code for your cylinder. This code is located on a silver shaft , close to where the key was put into the ignition cylinder. You may have to take off the shaft before being able to see it but once you do it, it should be three to four digits long.

Make sure to make sure you check each lock on your motorcycle for the same key code. Many locks will have the key code stamped or printed on them, Lost motorbike Key but not all. You should be able to see it on the ignition lock gas cap lock, helmet or seat lock.

You can also contact your dealer and request that they look up the code using your VIN number, however this is only useful for those who are in a rush to purchase a new key. Ducati and other high-end bikes will come with"masterkey. "masterkey." This key is the only one that can reprogram your bike's ECU. If you have lost it, you'll be required to purchase a replacement key and ECU.

You can also contact an locksmith to inquire if they can duplicate the key using the number of the cylinder. They should be able to do it in just a few minutes, and usually for about $25.

The locksmith will use a look-up table or program to translate your cylinder code into a key code that they can cut into a key and you'll have a brand new motorcycle key in short time. They'll probably be able to make one for you that works on both of your bikes, but it will cost a bit more because they'll need to take an extra few minutes with it.

Once you've got a key made you should keep a copy in your possession in case of emergency. It's a good idea make a note of your key that contains the serial number of your bike, so that the locksmith will be able to find it easily in the future.

2. Find a new fob

A lost key to your motorcycle is a hassle. It's essential to have the spare key handy, especially when you're a regular cyclist. But sometimes , that's not an option.

There are solutions that can help you get back on the road if you've lost your bike key. Depending on the particular make and model, you might be able get an additional key from your dealer or from a locksmith in the area.

Most bikes with keyless ignitions include a "failsafe" that stops you from starting the motorcycle when your key isn't present. This can be checked by loosening the cylinder of your ignition until you can see the three or four-digit code inside.

You can then call your dealer or locksmith and ask them to send you a key using the code. They will need your VIN number and some other information about your motorcycle to do this.

Some bikes, such as Ducatis, may come with a master key that reprograms the ECU of the motorcycle if it is lost. It will be a substantial expense, but worth it if your bike requires reprogramming.

Harley-Davidson models manufactured from 2007 and later have an electronic proximity key fob that can arm or disarm the security system of your motorcycle key programmer. This type of key fob comes with an additional five-digit PIN that you can modify to match your personal preferences.

A replacement key fob for your Harley-Davidson can be purchased from dealers and ranges from $40 to $50. It is waterproof and uses state-of-the-art rolling code technology to arm or dearm the security system.

You can also buy a second key to keep in your wallet in case you lose your first one. If you have a spare fob, store it in a safe drawer where you won't have to access it.

Certain manufacturers of motorcycles are offering Bluetooth keychain trackers that allow you to locate your missing key via a smartphone app. These are an additional step however they are more secure than standard keychains.

3. Have a Second Key Made

If you don't have a spare, or have just lost your key, you'll need to get a second one made. This can be done by either cutting a new metal key or programming an electronic transponder.

The latter is cheaper than a brand new key made of steel and more affordable for you. It's an excellent idea to create copies of your keys to ensure you are prepared in the event that one is damaged or lost.

A lot of locksmiths have equipment needed to make a key from the ignition cylinder , which is the first step in replacing your lost motorbike key. This isn't something every locksmith is capable of doing, so it's best to inquire around and look for other locksmiths who can assist you.

To create a key out of the cylinder first, you must remove the bolts that hold the cylinder section to the ignition. Then, you can employ a pair of needle nose pliers to detach the cylinder. You should be able to do it yourself if you've got the patience and an appropriate screwdriver.

Alternately, you can get an ignition cylinder that is new which will come with a new key compatible with your motorcycle. This is the quickest method to obtain a replacement key. However, you will need to wait as most motorcycles do not have them.

The cylinder code should be located on the manual of your motorcycle or on your steering neck. If not do that, you might need loosen up your motorcycle keys lost a bit to find the codes.

Getting a new ignition cylinder is the most efficient way to get a new key for your motorcycle and the best part is that it's likely to cost you a few dollars. It's worth the little cost and will give you a greater sense of security knowing that your motorbike is secure again.

4. Keep a Copy of Your Key

If you've lost your motorbike key it can be very frustrating. Based on the type of bike you have it could cost a lot to replace the key or it could take weeks to get a new one made.

The best way to minimize the chance of losing your motorcycle keys is to create a copy of them in advance. This will help you save money and make it easier to find the key you need.

You can keep a copy your motorcycle's key at your home, in the garage or in a safe deposit box. You can even have copies made by the locksmith shop, but you should check with your landlord to see if they are okay with this.

Although it's an inconvenience, it can save you time and can be an emergency in the event that you lose your key. It is a good idea to keep an extra set of keys in case you lose your keys.

You don't need to hire locksmith services to get your key. Instead, keep a copy of the key in a secure place such as your wallet, or a wallet that you can be connected to your keychain. This is especially helpful in the event of a long trip and want to make sure that a replacement key is available should you lose the original key.

Another option is to have a copy of your key programmed into your smartphone. This is especially helpful if you're on the move and require the help of a reputable locksmith/tow company immediately.

Also, you should keep copies of your keys stored with a trusted buddy or family member in order to give it to you should they ever misplace it. This is especially helpful when you have to take your bike out in public and don't want to risk losing your original key.